How should the ideal standards for better controlling be determined?
1. Determination of Cost Center
According to J. Betty, “A cost center is a department or part of a department or an item of equipment or machinery or a person or a group of persons in respect of which costs are accumulated, and one where control can be exercised.” Cost centers are necessary for determining the costs. If the whole factory is engaged in manufacturing a product, the factory will be a cost center. In fact, a cost center describes the product while cost is accumulated. Cost centers enable the determination of costs and fixation of responsibility. A cost center relating to a person is called personnel cost center, and a cost center relating to products and equipments is called impersonal cost center.
2. Current Standards
A current standard is a standard which is established for use over a short period of time and is related to current condition. It reflects the performance that should be attained during the current period. The period for current standard is normally one year. It is presumed that conditions of production will remain unchanged. In case there is any change in price or manufacturing condition, the standards are also revised. Current standard may be ideal standard and expected standard.
3. Ideal Standard
This is the standard which represents a high level of efficiency. Ideal standard is fixed on the assumption that favorable conditions will prevail and management will be at its best. The price paid for materials will be lowest and wastes etc. will be minimum possible. The labor time for making the production will be minimum and rates of wages will also be low. The overheads expenses are also set with maximum efficiency in mind. All the conditions, both internal and external, should be favorable and only then ideal standard will be achieved.
Ideal standard is fixed on the assumption of those conditions which may rarely exist. This standard is not practicable and may not be achieved. Though this standard may not be achieved, even then an effort is made. The deviation between targets and actual performance is ignorable. In practice, ideal standard has an adverse effect on the employees. They do not try to reach the standard because the standards are not considered realistic.
4. Basic Standards
A basic standard may be defined as a standard which is established for use for an indefinite period which may a long period. Basic standard is established for a long period and is not adjusted to the preset conations. The same standard remains in force for a long period. These standards are revised only on the changes in specification of material and technology productions. It is indeed just like a number against which subsequent process changes can be measured. Basic standard enables the measurement of changes in costs. For example, if the basic cost for material is Rs. 20 per unit and the current price is Rs. 25 per unit, it will show an increase of 25% in the cost of materials. The changes in manufacturing costs can be measured by taking basic standard, as a base standard cannot serve as a tool for cost control purpose because the standard is not revised for a long time. The deviation between standard cost and actual cost cannot be used as a yardstick for measuring efficiency.
5. Normal Standards
As per terminology, normal standard has been defined as a standard which, it is anticipated, can be attained over a future period of time, preferably long enough to cover one trade cycle. This standard is based on the conditions which will cover a future period of five years, concerning one trade cycle. If a normal cycle of ups and downs in sales and production is 10 years, then standard will be set on average sales and production which will cover all the years. The standard attempts to cover variance in the production from one time to another time. An average is taken from the periods of recession and depression. The normal standard concept is theoretical and cannot be used for cost control purpose. Normal standard can be properly applied for absorption of overhead cost over a long period of time.
6. Organization for Standard Costing
The success of standard costing system will depend upon the setting up of proper standards. For the purpose of setting standards, a person or a committee should be given this job. In a big concern, a standard costing committee is formed for this purpose. The committee includes production manager, purchase manager, sales manager, personnel manager, chief engineer and cost accountant. The cost accountant acts as a co-coordinator of this committee.
7. Accounting System
Classification of accounts is necessary to meet the required purpose, i.e. function, asset or revenue item. Codes can be used to have a speedy collection of accounts. A standard is a pre-determined measure of material, labor and overheads. It may be expressed in quality and its monetary measurements in standard costs.
1. Determination of Cost Center
According to J. Betty, “A cost center is a department or part of a department or an item of equipment or machinery or a person or a group of persons in respect of which costs are accumulated, and one where control can be exercised.” Cost centers are necessary for determining the costs. If the whole factory is engaged in manufacturing a product, the factory will be a cost center. In fact, a cost center describes the product while cost is accumulated. Cost centers enable the determination of costs and fixation of responsibility. A cost center relating to a person is called personnel cost center, and a cost center relating to products and equipments is called impersonal cost center.
2. Current Standards
A current standard is a standard which is established for use over a short period of time and is related to current condition. It reflects the performance that should be attained during the current period. The period for current standard is normally one year. It is presumed that conditions of production will remain unchanged. In case there is any change in price or manufacturing condition, the standards are also revised. Current standard may be ideal standard and expected standard.
3. Ideal Standard
This is the standard which represents a high level of efficiency. Ideal standard is fixed on the assumption that favorable conditions will prevail and management will be at its best. The price paid for materials will be lowest and wastes etc. will be minimum possible. The labor time for making the production will be minimum and rates of wages will also be low. The overheads expenses are also set with maximum efficiency in mind. All the conditions, both internal and external, should be favorable and only then ideal standard will be achieved.
Ideal standard is fixed on the assumption of those conditions which may rarely exist. This standard is not practicable and may not be achieved. Though this standard may not be achieved, even then an effort is made. The deviation between targets and actual performance is ignorable. In practice, ideal standard has an adverse effect on the employees. They do not try to reach the standard because the standards are not considered realistic.
4. Basic Standards
A basic standard may be defined as a standard which is established for use for an indefinite period which may a long period. Basic standard is established for a long period and is not adjusted to the preset conations. The same standard remains in force for a long period. These standards are revised only on the changes in specification of material and technology productions. It is indeed just like a number against which subsequent process changes can be measured. Basic standard enables the measurement of changes in costs. For example, if the basic cost for material is Rs. 20 per unit and the current price is Rs. 25 per unit, it will show an increase of 25% in the cost of materials. The changes in manufacturing costs can be measured by taking basic standard, as a base standard cannot serve as a tool for cost control purpose because the standard is not revised for a long time. The deviation between standard cost and actual cost cannot be used as a yardstick for measuring efficiency.
5. Normal Standards
As per terminology, normal standard has been defined as a standard which, it is anticipated, can be attained over a future period of time, preferably long enough to cover one trade cycle. This standard is based on the conditions which will cover a future period of five years, concerning one trade cycle. If a normal cycle of ups and downs in sales and production is 10 years, then standard will be set on average sales and production which will cover all the years. The standard attempts to cover variance in the production from one time to another time. An average is taken from the periods of recession and depression. The normal standard concept is theoretical and cannot be used for cost control purpose. Normal standard can be properly applied for absorption of overhead cost over a long period of time.
6. Organization for Standard Costing
The success of standard costing system will depend upon the setting up of proper standards. For the purpose of setting standards, a person or a committee should be given this job. In a big concern, a standard costing committee is formed for this purpose. The committee includes production manager, purchase manager, sales manager, personnel manager, chief engineer and cost accountant. The cost accountant acts as a co-coordinator of this committee.
7. Accounting System
Classification of accounts is necessary to meet the required purpose, i.e. function, asset or revenue item. Codes can be used to have a speedy collection of accounts. A standard is a pre-determined measure of material, labor and overheads. It may be expressed in quality and its monetary measurements in standard costs.
No comments:
Post a Comment